Waste Plastic Pet Bottle Recycling Machine Stainles Steel 304 Easy To Operate
Final products has good quality. When processPET bottle, final products humidity below 1%, impurities100ppm,PVC label content 100ppm . The whole line capacity between 300kg/h-3000kg/hour
Parts which contact material use SUS304 stainless steel, thickness more than 3mm, ensure long service lift time
World famous brand components applied on the production line- SKF bearing, Siemens contactor, Omron temperature, ABB invertor, Siemens PLC control, etc.
The whole production line with CE certification, ISO9001 certification
MACHINE LIST :
1 Label remover
Remove the label from bottles
2 Metal detector
This equipment is optional
3 Crusher
Crush with water, and this machine can cut the PET bottle into tiny flakes.
4 Hot washer
Hot washer is the most important step of the recycling line, which can remove the contamination such as grease,oil, glue etc.
5 Screw feeder
Screw feeder is mainly used for conveying the material.
7 High speed Friction washer
High speed friction washer is a highly efficient machine for cleaning PET flakes.
8 Washing tank
Washing tank separates materials based on the different density.
9 Dewatering machine
The first stage of drying process, dewatering machine can lower the PET flake's moisture to roughly 20%.
10 Pipeline drying system
Pipeline drying uses hot air to further dry the flakes which can reduce moisture level to below 1%.
11 silo A large storage tank for clean,dry PET flakes.
Technical Features:
1. High automation level, try best to reduce your cost on labor(especially for three shifts)and ensure high processing capacity: 100-2000kg/hr.
2. Friendly control system(PLC integrated & separated control on each machine)and Touch screen panel, easy for operation, monitor and emergency stop.
3. All parts contacting with plastic material and water are made of high-quality 304 stainless steel; ensure no second pollution to flakes.
4. This China Hot Selling Waste PET Bottle Washing Machine can easily wash and recycle waste PET bottle flakes. Equipment at the end of the washing line so that the completely dry flakes can be collected and packed directly after being washed.
5. The whole production line can be designed on the basis of how dirty the flakes are, and make sure of the quality of the final products.
6. Coordinating the production line with follow programmed work (granulating system), and it will make waste and dirty PET bottles to be the PET granule material and in order to producing new PET bottles.
| Input capacity | 500kg/h | 1000 kg/h | 2000 kg/h |
| Workshop(M*M*M) | 42 (L)×10(W)×6(H) | 55(L)×15(W)×6(H) | 70(L)×18(W)×6(H) |
| Ancillary staff | 6Persons | 8 Persons | 12 Persons |
| Installation power | 156KW | 307KW | 420KW |
| Water Consumption: | 2Ton/h | 3.5Ton/h | 5 Ton/h |
| Final product | Moisture: max 1% Bulk density: 0.3G/CM3 Particle size: 14-18mm Metal content: max.20ppm Floatable contamination: less than 200ppm Total impurity: 320ppm | Moisture: max 1% Bulk density: 0.3G/CM3 Particle size: 14-18mm Metal content: max. 20ppm Floatable contamination: less than 200ppm Total impurity: 320ppm | Moisture: max 1% Bulk density: 0.3G/CM3 Particle size: 14-18mm Metal content: Max. 20ppm Floatable contamination: less than 200ppm Total impurity: 320ppm |
Product Tags:
|
|
Waste Plastic Pet Bottle Recycling Machine Stainles Steel 304 Easy To Operate Images
|
